Baytech MRP units 2012 Manual de usuario descargar pdf (Pagina 49)

Page49

ModuleName

RPCManagement

Menu 11: Network RPC Management

TemperatureAlarmThreshold

Select 1), WebEnable, enables or disables

the web page feature, Default is Enabled:

Web is ENABLED. Enable? (Y/N):

Web Login is DISABLED. Enable? (Y/N):

Web secure SSL connection is DISABLED. Enable? (Y/N):

Select 2), WebLoginEnable,enables or

disables the login window to the web page,

Default is Enabled

Select 3), WebSecureLoginEnable,

enables or disables a secure web connection to

the web page, Default is Disabled:

Select 4), WebLoginInactivityTimeout,

sets the Inactivity timeout to the web page,

Default is zero minutes:

Web Connection Inactivity Timeout is 0 minutes

Enter timeout, in minutes (<=120, 0 to disable) :

NOTE: The web page is a quick test to see if SNMP protocol is working in the unit, if SNMP has

been enabled.

IMPORTANCE: Currently, all users who access the unit through the web page have administrator

privilege, unless a TACACS server and privilege levels are used for authentication.

IMPORTANCE: If a user is still connected to the outlet controller menu, or the user does not

properly release the controller, the Web page will not update.

Module Name is: RPC

Enter Module Name (32 chars max):

Select 9), from the Network Configuration menu

changes the unit name.

Select 1), changes the alarm for Internal Temperature:

Enter the Selection (Sel) Number and press Enter. Type a

value in tenths of a degree, i.e.500 = 50.0⁰ C

Sel M/P Identifier Tmp Lvl

1 2/1 MRP10 500

Enter threshold value in tenths of

unit measurement (degrees,%,etc.):

ost

ontrolled RPC Feature Configu

ation

Temperature Alarm Threshold........1

Under Voltage Alarm Threshold......2

Over Voltage Alarm Threshold.......3

Low Current Alarm Threshold........4

Environmental Sensors..............5

Outlet Groups......................6

Temperature units (degrees C/F)....7

RPC Cascade Mode...................8

Power Factor Threshold.............9

Select 10), from the Network Configuration

Menu, establishes SNMP outlet traps used by a

remote SNMP Manager by creating outlet

groups and alarm thresholds.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 66 67

Comentarios a estos manuales

Sin comentarios

Baytech MRP units 2012 Manual de usuario Pagina 49

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware De La Computadora Baytech MRP units 2012