Baytech MRP units 2012 Manual de usuario Pagina 38

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 67
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 37
Page38
SerialPortDeviceName
AttentionCharacter
DisconnectTimeguard
ConnectPortIDEcho
P
ort ID Echo is...................Disable
d
Connect Port ID Echo Menu
Disable Port ID Echo..............1
Use Module, Port Number...........2
Use Device Name...................3
Exit..............................X,CR
Enter Request :
Select 1), disables the echo. The Default setting is Disabled.
The unit displays: (blank)
Select 2), echoes the module and port number.
Select 3), echoes the device name.
The unit displays:
BAYTECH
For further information check:
http://www.baytech.net/
02,1
The unit displays:
BAYTECH
For further information check:
http://www.baytech.net/
MRP10
Current device name: EIA-RS232
Enter device name for serial port ((1 - 16 char., CR to end) :
Pressing the Attention Character 5 consecutive times will access the
network main menu. Select 4, from the Network Configuration
Menu, to change the attention character. The unit displays the
following: The Default is a semi-colon (;).
Attention Character is........... ;
Enter Attention Character :
Select 5), from the Network Configuration Menu, ensures reliable binary data transmission by
providing a one-second “Timeguard” after the unit receives the attention character. If more data is
received within the delay period, the unit treats the character as data, not an attention character; thereby
preventing unwanted port disconnection. Select 5, from the
network menu. The Default setting is Disabled.
Disconnect Time Guard is.......... Disabled
Enable ? (Y/N), CR for no change) :
Select 3), from the Network
Configuration Menu allows the serial
port to be renamed. Type the new port
name and press ‘Enter’.
Select 6), from the Network Configuration
Menu, sets the port identification. The unit
displays the Port ID Echo Menu.
Vista de pagina 37
1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 66 67

Comentarios a estos manuales

Sin comentarios